Subaru Legacy BN/BS (2015-2019) Service Manual: Air vent grille

Installation

1. DRIVER’S SIDE1. When replacing the actuator with a new part, apply a thin coat of grease evenly to the side face (a) of lever pin by using approx. 5 mm (0.2 in) width and approx. 0.1 g (0.004 ...

Removal

1. CENTER GRILLE ASSEMBLY1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the panel - center grille assembly.(1) Release the clips and claws.(2) Detach the connectors, and remove ...

Other materials:

Assembly
1. Using the ST, install the taper roller bearing (transfer case side).CAUTION:Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).NOTE:Be careful when handling because the taper roller bearing and the outer race are used as a set.ST 927640000INSTALLER(A)Taper roller bearing ( ...