Subaru Legacy BN/BS (2015-2019) Owners Manual: Changing the oil and oil filter
Change the oil and oil filter according to
the maintenance schedule in the "Warranty
and Maintenance Booklet".
NOTE
- Changing the engine oil and oil filter
should be performed by a well-trained
expert. Contact your SUBARU dealer
for changing the engine oil and oil filter.
Fully trained mechanics are on standby
at a SUBARU dealer to utilize the
special tools, spare parts and recommended
oil for this work, and also,
used oils are properly disposed of.
- If performing oil replacement yourself,
observe the local regulations and
dispose of waste oil properly.
|
Park the vehicle on a level surface and
stop the engine. If you check the oil level
just after stopping the engine, wait a few
minutes for the oil to drain back into the oil
pan before chec ...
CAUTION
Use only engine oil with the recommended
grade and viscosity.
Refer to "Engine oil" F12-4.
NOTE
Engine oil viscosity (thickness) affects
fuel economy. Oils of lower visco ...
Other materials:
Dtc p0451 evap system (cpc) pressure sensor/switch circuit range/performance
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK FOR ANY OTHER DTC ON DISPLAY.Is an ...