Subaru Legacy BN/BS (2015-2019) Service Manual: Check list for interview check

Subaru Legacy BN/BS (2015-2019) Service Manual / Keyless access with push button start system (diagnostics) / Check list for interview check

Inspect the following items regarding the vehicle’s state.

Keyless Access with Push Button Start System Trouble Check List for Interview Received Year Month Date
Customer’s name		Registration No.	Initial year of registration Year Month Date
		Vehicle model	Frame number
Interviewer	Inspector	Engine type	Odometer reading
Customer specified content
Date and time when the trouble occurred		Frequency of trouble occurrence
Condition of trouble occurrence		Weather
Road conditions		Occurrence location
Accessory installation condition
Trouble condition
Diagnostic code			( )
Immobilizer system	Engine does not start		Starter does not operate Starter operates but engine does not start Engine starts but stops immediately
	Does not start with remote engine starter
Steering lock system	The steering lock is not released
	The steering lock does not lock
Keyless access system	Can not lock/unlock using the touch sensor (lock), touch sensor (unlock), trunk opener button or rear gate opener button and rear lock button
	Cannot lock with the touch sensor (lock) Cannot unlock with the touch sensor (unlock) Cannot lock nor unlock with the touch sensor (lock), touch sensor (unlock) Trunk does not open with the trunk opener button. Rear gate can not be locked with the rear lock button		Driver’s side door Passenger’s side door Trunk
	Access key lockout protection function does not operate		Passenger room Luggage room
	The LED does not illuminate when the access key button is pressed
	The external buzzer does not beep
	The passenger room buzzer does not sound
Other	The room light or map light does not illuminate ( )

NOTE:

• Perform the diagnostics according to the basic diagnostic procedure.

• If the room light or map light does not illuminate and the keyless access does not function at the same time, the backup fuse may be loose or blown.

Basic diagnostic procedure procedure

CAUTION:• Subaru Select Monitor kit is required for reading DTC, performing diagnosis and reading current data.• Before removal or installation, be sure to remove any foreign matter (dust, ...

Clear memory mode operation

1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Other materials:

Adjustment
NOTE:Two persons are required to perform the MT gear select cable adjustment. Only the step 6) requires two workers.1. Move the shift lever to the 6th.2. Remove the plate cable assembly.3. Disconnect the MT gear select cable.NOTE:Push the MT gear select cable in the direction of arrow, and remove it ...