Subaru Legacy BN/BS (2015-2019) Service Manual: Clear memory mode operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (diagnostics) / Clear memory mode operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Air Conditioner» and select «Enter».

5. On «Select Function» display, select «DTC».

6. On «DTC» display, select «Clear Memory».

NOTE:

For detailed operation procedures, refer to “Application help”.

Basic diagnostic procedure procedure

NOTE:When the sunload sensor check is performed indoors or in the shade, it could be diagnosed as sensor having an open circuit. Always perform the inspection in direct sunlight.STEPCHECKYESNO1.START ...

Diagnostic procedure for subaru select monitor communication communication for initializing impossible

DIAGNOSIS:Defective CAN communication circuitTROUBLE SYMPTOM:• LAN system is abnormal.• Communication failure between Subaru Select Monitor and A/C CMWIRING DIAGRAM:NOTE:For the coupling c ...

Other materials:

Removal
1. Lift up the vehicle, and then remove the rear wheels.2. Remove the trailing link. Rear Trailing Link > REMOVAL3. Remove the lateral link assembly - front.(1) Remove the snap pin (a) and nut (b).(2) Remove the ball joint from the housing assembly - rear axle.Preparation tool:Tie-rod ball joint pu ...