Subaru Legacy BN/BS (2015-2019) Service Manual: Control module i o signal

Inspection mode procedure

It is possible to diagnose the DTC by performing the indicated inspection mode.After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and th ...

System block diagram

Main signals used between DCM and relevant CM ...

Other materials:

Inspection
STEPCHECKYESNO1.CHECK IGNITION SWITCH ILLUMINATION.1) Turn the ignition switch to ON.2) Check the lighting condition of the ignition switch illumination.Does the ignition switch illumination blink-Check the function setting of body integrated unit. General Diagnostic Table Ignition Switch Illuminat ...