Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly
CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 1. TAIL LIGHT/STOP LIGHT BULB NOTE: Since the LED type is a non-disassembled part, it cannot be removed. 2. TURN SIGNAL LIGHT BULB Rotate the bulb socket in the direction of arrow shown in the figure to remove the turn signal light bulb. • Sedan model
• OUTBACK model
3. SIDE MARKER LIGHT BULB 1. Rotate the bulb socket in the direction of arrow shown in the figure to remove the side marker light bulb. • Sedan model
• OUTBACK model
|
Inspection
1. Apply battery voltage between the connector terminals to check the lighting condition of the light.• Sedan modelTerminal No.Inspection conditionsSpecification3 (+) — 2 (−)Apply batter ...
Other materials:
Installation
1. Clean the mating surface of drive pinion retainer and converter case.2. Adjust the backlash and tooth contact between drive pinion shaft assembly and the front differential side gear. Drive Pinion Shaft Assembly > ADJUSTMENT3. Install O-rings in two locations to the converter case.NOTE:• U ...
