Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Reverse idler gear / Disassembly

1. REVERSE IDLER GEAR ASSY

1. Remove the snap ring and friction plate.

(A)	Friction plate
(B)	Snap ring

2. Remove the reverse idler sub gear and reverse idler spring.

(A)	Reverse idler sub gear
(B)	Reverse idler spring
(C)	Reverse idler gear

Inspection

1. Check the clearance between the reverse idler gear bushing and reverse idler gear washer. If the value is out of specification, select the appropriate reverse idler gear bushing and adjust.Clearanc ...

Assembly

1. REVERSE IDLER GEAR ASSY1. Attach the reverse idler sub gear and reverse idler spring.NOTE:Point the stamp (marking A) towards the outside, and install the reverse idler sub gear.(A)Reverse idler su ...

Other materials:

Installation
1. SEDAN MODEL1. Replace the light assembly gasket with a new part.2. Install the light assembly - rear combination.CAUTION:Be careful not to catch the harness in between the parts.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)3. Install the trunk trim panel - side.4. Connect the ground ter ...