Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b281b steering angle sensor fail

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b281b steering angle sensor fail

DTC DETECTING CONDITION:

Defective steering angle sensor

TROUBLE SYMPTOM:

All functions of EyeSight system do not operate.

NOTE:

Check the steering angle sensor. Basic Diagnostic Procedure > PROCEDURE

Dtc b281c incompatible with eyesight (eps)

Detected when the EPS CM which is not exclusively for EyeSight is installed.DTC DETECTING CONDITION:Incorrect specifications of EPS CM.TROUBLE SYMPTOM:All functions of EyeSight system do not operate.N ...

Dtc b2817 brake lamp

DTC DETECTING CONDITION:• Defective brake light relay• Defective brake light switch• Defective VDCTROUBLE SYMPTOM:• All functions of EyeSight system do not operate.• EyeS ...

Other materials:

Installation
1. Install the purge control solenoid valve, and connect the connector and vacuum hose to the purge control solenoid valve.NOTE:Connect the vacuum hose as shown in the figure.(a)To intake manifold(b)To fuel pipe Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the air intake boot. ...