Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0074 control module communication bus "body-can" off

Subaru Legacy BN/BS (2015-2019) Service Manual / Auto headlight beam leveler system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0074 control module communication bus "body-can" off

Detected when CAN line abnormality is detected.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0416 invalid data received from vehicle dynamics control module

DTC DETECTING CONDITION:Detected when data (vehicle speed signal) from VDC CM is abnormal.TROUBLE SYMPTOM:The auto headlight beam leveler does not operate.NOTE:Perform the diagnosis for VDC. Basic Di ...

Dtc b2902 rear height sensor circuit

DTC DETECTING CONDITION:Rear vehicle height sensor error is detected for 10 seconds or more.TROUBLE SYMPTOM:The auto headlight beam leveler does not operate.CAUTION:Initialization is required after re ...

Other materials:

Installation
1. Install the sensor assembly - headlight beam leveler.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the rear wheels.Tightening torque:120 N·m (12.2 kgf-m, 88.5 ft-lb)3. Lower the vehicle.4. Connect the ground terminal to battery sensor. NOTE5. Perform reinitialization o ...