Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0101 lost communication with tcm

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0101 lost communication with tcm

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

Dtc c1922 hill hold switch circuit

DTC DETECTING CONDITION:A fault is detected if the hill hold switch is pressed and held for a long period of time.TROUBLE SYMPTOM:Hill hold function cannot be set.WIRING DIAGRAM:NOTE:For the coupling ...

Dtc u0100 lost communication with ecm/pcm "a"

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure ...

Other materials:

Installation
1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH1. Install the back-up light switch & neutral position switch with the harness.NOTE:Use a new gasket.Tightening torque:32.3 N·m (3.3 kgf-m, 23.8 ft-lb)(A)Neutral position switch(B)Back-up light switch2. Lower the vehicle.3. Connect the connectors of ...