Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0122 lost communication with vehicle dynamics control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc u0122 lost communication with vehicle dynamics control module

DTC DETECTING CONDITION:

Detected when CAN data from VDC CM does not arrive.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0140 lost communication with body control module

DTC DETECTING CONDITION:Detected when CAN data from body integrated unit does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc b11f0 disposal process complete

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Disposal process of airbag control module is completed.CAUTION:Before performing diagnosis, refer to “CAUTION&r ...

Other materials:

Installation
1. Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor.NOTE:Use a new gasket.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Fill engine coolant. Engine Coolant > REPLACEME ...