This indicator light illuminates while the front fog lights are illuminated. X-mode indicator (if equipped) This indicator appears while the X-mode is activated. It will disappear when the Xmode is deactivated. Hill descent control indicator (if equipped) This indicator appears while the hill descent control function is in standby. It will flash while the hill descent control function is operating. It will disappear when the hill descent control function is not available Steering responsive fog lights OFF indicator (models with EyeSight system) This indicator appears when the steering responsive fog lights system is deactivated. This indicator disappears when the system is activated. For details about the steering responsive fog lights system, refer to "Steering responsive fog lights system (models with EyeSight system)" . BSD/RCTA warning indicator (if equipped) This warning indicator appears on the multi information display when the BSD (Blind Spot Detection) or RCTA (Rear Cross Traffic Alert) is not functioning for any reason. For further details, refer to "BSD/RCTA warning indicator" . If this indicator remains displayed, have your vehicle inspected by your SUBARU dealer as soon as possible. BSD/RCTA OFF indicator (if equipped) This indicator appears on the multi information display when the BSD/RCTA OFF switch is pressed to deactivate the BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert). For details, refer to "BSD/RCTA OFF switch" . Icy road surface warning indicator When the outside temperature is 378F (38C) or less, the icy road surface warning indicator will illuminate to inform the driver that the road surface may be frozen. NOTE
|
Dtc b2276 acc relay off signal
DTC DETECTING CONDITION:When input error occurs in accessory relay cut input signal of keyless access CM.TROUBLE SYMPTOM:• The accessory power supply is not cut during engine start.• Starter rotation is slow.CAUTION:For replacement procedure of keyless access CM and ECM, refer to the &ld ...