Subaru Legacy BN/BS (2015-2019) Owners Manual: Hill Holder indicator light

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Warning and indicator lights / Hill Holder indicator light

WARNING If the Hill Holder indicator light does not illuminate even when the Hill Holder switch is pressed to activate the Hill Holder function, the electronic parking brake system may be malfunctioning. Immediately stop the vehicle in a safe location and contact your SUBARU dealer.

The light illuminates when the Hill Holder switch is pressed to activate the Hill Holder function. For details about the Hill Holder function, "Hill Holder function" 45.

Electronic parking brake indicator light

Parking brake indicator The light illuminates with the parking brake applied while the ignition switch is in the "ON" position. It turns off when the parking brake is fully released. Electronic p ...

Low fuel warning light

The low fuel warning light illuminates when the tank is nearly empty approximately 2.6 US gal (10.0 liters, or 2.2 Imp gal). It only operates when the ignition switch is in the "ON" position. NOT ...

Other materials:

Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new clevis pin.3. Connect the connector to the brake switch.4. Connect the connector to the clutch switch.5 ...