Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown again, check the system wiring harness. |
Location
Fuse & relay box (F/B)Fuse 7.5 A (stop light and brake switch)(A)NOTE:For other related fuses, refer to the wiring diagram. Power Supply Circuit ...
Differentials
...
Other materials:
Disassembly
1. Disconnect the terminal M from the magnet switch assembly.2. Remove the magnet switch assembly from the starter housing assembly.3. Remove screws (A) of the brush holder assembly, and through bolts (B) on both sides, and remove the starter cover assembly.4. Remove the brush holder assembly from t ...
© 2017-2024 Copyright www.sulegacy.com
