Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Exterior interior trim / Center console / Installation

CAUTION:

Make sure that the center grille assembly is inserted into the air vent duct correctly.

1. Install the audio assembly or navigation assembly.

2. Install the heater control assembly.

3. Install the center grille assembly.

4. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the center grille assembly. Air Vent Grille > REMOVAL3. Remove the heater control assembly. Control Panel > REMOVAL4. Remove the ...

Console box

...

Other materials:

Installation
1. Install the CVTF cooler (with warmer feature).Tightening torque:23 N·m (2.3 kgf-m, 17.0 ft-lb)2. Install the engine coolant inlet hose.NOTE:With the paint on the engine coolant inlet hose facing the vehicle outside, install the hose to the engine side pipe.3. Install the CVTF inlet hose an ...