Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the floor under protector. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the fuel tank protector. • H4 model: Fuel Tank Protector > INSTALLATION • H6 model: Fuel Tank Protector > INSTALLATION 3. Lower the vehicle. |
Removal
1. Lift up the vehicle.NOTE:A plate type lift cannot be used.2. Remove the fuel tank protector.• H4 model: Fuel Tank Protector > REMOVAL• H6 model: Fuel Tank Protector > REMOVAL3. Remove ...
Front bumper
...
Other materials:
General diagnostic table inspection
Symptom or troublePossible causeRemedy1. Oil leakage(1) Worn, scratched, or incorrectly seated front or side oil seal. Scored, battered or excessively worn sliding surface of companion flange.Repair or replace.(2) Clogged or damaged air breather cap.Clean, repair or replace.(3) Loose bolts on the si ...
© 2017-2025 Copyright www.sulegacy.com
