1. Install the bulb and lens. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Install the sun visor assembly. 3. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or mor ...