Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Starting charging systems(h6do) / Starter relay / Installation

1. Install the starter relay to the relay block.

2. Install the instrument panel lower cover. Instrument Panel Lower Cover > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the starter relay does not have deformation, cracks and any other damage.2. Measure the resistance between starter relay terminals.Terminal No.Standard1 and 21 M- or more3 and 4128.07 � ...

Emission control (aux. Emission control devices)(h4do)

...

Other materials:

Diagnostics with phenomenon inspection
1. BEAM LEVEL CONTROL DOES NOT FUNCTIONCAUTION:• Before performing diagnosis, check the fuse in this circuit.• Initialization is required after replacing the auto headlight beam leveler CM.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Headlight beam ...