Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h4do) / Egr pipe / Installation

1. Install the EGR pipe to the intake manifold assembly and EGR control valve.

NOTE:

Use a new gasket.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

2. Install the throttle body. Throttle Body > INSTALLATION

3. Install the air intake boot. Air Intake Boot > INSTALLATION

Inspection

Check that the EGR pipe has no deformation, cracks or other damages. ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Connect the harness connector.2. Install the primary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:7 ...

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Inspection

Front catalytic converter

Other materials: