1. Install the regulator and motor assembly rear. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the glass assembly - rear door. Rear Door Glass > INSTALLATION 3. Install the sealing cover - rear door. 4. Install the trim panel - rear door. Door Trim > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE |
Removal
1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT STOPPER3. Remove the drive plate and reinforcement drive plate. ...