Subaru Legacy BN/BS (2015-2019) Service Manual: Key lock cylinders

Installation

1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the doors, trunk lid and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. ...

Removal

1. STEERING LOCK1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - column.(1) Remove the clips, and r ...

Other materials:

Installation
1. Install the inhibitor switch to the transmission case temporarily.2. Connect the inhibitor harness connector to the inhibitor switch.3. Install the shifter arm and fix with the spring pin.NOTE:Use new spring pin.(A)Spring pin(B)Shifter arm4. Shift the shifter arm to “N” range.5. Insta ...