Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: List

List of ACC cancel code(s)

ACC cancel code

Item

Contents of diagnosis

02

ACC Mode:Maintaining Standstill Position

Displayed when the cruise control is cancelled after the own vehicle stops following the preceding vehicle.

04

ACC Mode:Stereo Camera Temporary

Displayed when the cruise control is canceled by the EyeSight temporarily stop while driving in the adaptive cruise mode.

08

Common:Vehicle Speed Sensor Abnormal

Displayed when the cruise control is canceled due to a wheel speed sensor malfunction.

09

Common:Depress The Brake Pedal

Displayed when the cruise control is canceled by the brake operation of the driver.

0A

Common:Pre-Collision Braking

Displayed when the cruise control is canceled because the pre-collision brake function is activated.

0B

Common:AT Manual Mode

Displayed when the cruise control is canceled because the AT manual mode is selected or paddle operation is performed.

0C

Common:VDC SW OFF

Displayed when the VDC function is turned OFF by the VDC OFF switch and the cruise control is canceled.

0D

Common:Any Doors is Opened

Displayed when the cruise control is canceled because either of the driver’s door, passenger’s door, or rear doors is opened.

0E

Common:Unfastened The Driver’s Seatbelt

Displayed when the cruise control is canceled because the driver’s seat belt is unfastened.

0F

Common:EPB Activation

Displayed when the cruise control is canceled because the EPB is activated.

10

Common:EPB Special Mode

Displayed when the cruise control is canceled by an irregular operation of a driver, which repeats activation/deactivation of the EPB.

12

Common:AT Gear Range

Displayed in the following situations: The driver performed the SET or RES operation to drive the vehicle either in the adaptive cruise mode or in the constant speed mode, but that operation was not accepted because it was done immediately after shifting into D range.

13

Common:Steep Sloping Road

Displayed when the road surface was judged to be too steep and therefore the cruise control is canceled.

14

Common:ABS Activation

Displayed when the cruise control is canceled because the ABS is activated.

15

Common:Steering Angle Excessive

Displayed when the cruise control is canceled because the steering wheel is fully turned.

16

ACC Mode:Vehicle Stop Judge

Displayed when the cruise control is cancelled after the own vehicle stops following the preceding vehicle while driving in the adaptive cruise control mode.

17

Common:Parking Brake Activation

Displayed when the cruise control is cancelled because the parking brake is applied.

18

ACC Mode:Automatic Cancellation

Displayed when the cruise control is cancelled under the following situations: The own vehicle stops following the preceding vehicle while driving in the adaptive cruise control mode, and the driver repeats the SET or RES operation and the automatic brake control continues for 120 seconds.

19

common:X mode

Displayed when the cruise control is canceled because the X mode is activated.

1B

VDC actuation

Displayed when the cruise control is canceled because the VDC is activated.

1C

Common:Cancel SW Operation

This item is displayed when the cruise control is canceled by the operation of CANCEL switch.

1D

Common:Cruise SW OFF

This item is displayed when the cruise control is canceled by turning the cruise switch OFF.

1E

CC Mode:Max Speed Exceeded

Displayed when the cruise control is canceled because the own vehicle speed exceeds the controllable range while driving in the constant speed mode.

1F

ACC Mode:Max Speed Exceeded

Displayed when the cruise control is canceled because the own vehicle speed exceeds the controllable range while driving in the adaptive cruise mode.

NOTE:

“Adaptive cruise mode”: Adaptive cruise control

“Constant speed mode”: Conventional cruise control

“Common”: Adaptive cruise control and conventional cruise control

Operation
When the ACC cancel code is detected from the stereo camera, the cruise control will be cancelled.1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target ve ...

Active lane keep system code(s) display
...

Other materials:

Installation
1. Install the reduction driven gear assembly.2. Select shims. Transfer Reduction Driven Gear > ADJUSTMENT3. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION4. Install the rear drive shaft. Rear Drive Shaft > INSTALLATION5. Mount the selected shim onto ball bearing.6. Install ...

© 2017-2024 Copyright www.sulegacy.com