Subaru Legacy BN/BS (2015-2019) Service Manual: List

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Read current data / List

Item	Display	Note
Trip Count	—	General Description > CAUTION
Count	—
Time Count [msec]	—
Belt Buckle Switch LH	Unbelted/Belted/Other	“Belted” when the left side seat belt is fastened “Unbelted” when the left side seat belt is not fastened “Other” in other cases
Belt Buckle Switch RH	Unbelted/Belted/Other	“Belted” when the right side seat belt is fastened “Unbelted” when the right side seat belt is not fastened “Other” in other cases
Passenger Occupant Status	Occupied/Adult/Child/Empty or CRS	“Occupied” when the occupant is present “Adult” “Child” “Empty or CRS” when the seat is unoccupied or when child restraint seat is installed CAUTION: When checking the operating status, be careful of the followings. • When the seat is unoccupied: Do not place anything on the seat. • Child restraint seat: Install the seat according to its instruction manual. • When the seat is occupied: Someone who weighs at least approx. 70 kg (155 lb) must be seated during the check.
Passenger Airbag Status	ON/OFF	“ON” when the passenger occupant status is “Occupied” “OFF” when the status is “Empty or CRS”
Data record No.	No Definition/1	Displays “1” when any EDR data is recorded.
Data record No.	No Definition/1	Displays “1” when any EDR data is recorded.

Operation

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.1. On «Start» display, select «Diagnos ...

Subaru select monitor

...

Other materials:

Installation
1. PRE-COLLISION BRAKE OFF SWITCH/LANE DEPARTURE WARNING OFF SWITCH1. Install the pre-collision brake OFF switch or the lane departure warning OFF switch.2. Install the cover assembly - instrument panel LWR driver.3. Connect the ground terminal to battery sensor. NOTE2. EyeSight STEERING SWITCHNOTE ...