Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Operating range for push-button start system

Operating range for push-button start system

Legacy

  1.  Antenna
  2.  Operating range

Operating range for push-button start system

Outback

  1.  Antenna
  2.  Operating range

NOTE

  •  If the access key is not detected within the operating range of the antennas inside the vehicle, the pushbutton ignition switch and the engine start cannot be operated.
  •  Even when the access key is outside the vehicle, if it is placed too close to the glass, it may be possible to switch the power or to start the engine.
  •  Do not leave the access key in the following places. It may become impossible to operate the push-button ignition switch and the engine start.
  •  On the instrument panel
  •  On the floor
  •  Inside the glove box
  •  Inside the door trim pocket
  •  On the rear seat
  •  On the rear shelf (Legacy)
  •  Inside the trunk (Legacy)
  •  At the corner of the cargo area (Outback)
  •  When operating the push-button ignition switch or starting the engine, if the access key battery is discharged, perform the procedure described in "Access key - if access key does not operate properly" . In such a case, replace the battery immediately.

    Refer to "Replacing battery of access key" F11-50.

Push-button ignition switch (models with push-button start system)
...

Switching power status
1) Operation indicator 2) Push-button ignition switch The power status is switched every time the push-button ignition switch is pressed.  Carry the access key, and sit in the driver ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Remove the bolts, and then remove the panel - knee guard.4. Release the lock and remove the relay holder.5. Remove the auto headlight beam ...

© 2017-2024 Copyright www.sulegacy.com