Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «EyeSight» and select «Enter». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «FFD». NOTE: • For detailed operation procedures, refer to “Application help”. • Freeze frame data is stored for three DTCs. Allocation of the three DTCs are as follows: – DTC that occurred first. – DTC that occurred first during the latest driving cycle (from IGN ON to IGN OFF). – DTC that occurred first during the second latest driving cycle. – However, DTCs will be stored in order of occurrence until these three DTCs are stored. • For details on freeze frame data, refer to List of freeze frame data. Freeze Frame Data Display > LIST • Freeze frame data is cleared in Clear Memory Mode. Clear Memory Mode |
List
• List of freeze frame dataDisplayContentUnitECU Power Supply Voltage (IG)Display of input voltage of stereo cameraVEngine SpeedEngine speedrpmAccel opening angleAcceleration opening angle signa ...
Other materials:
Dtc p0974 shift solenoid "a" control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Gear is not changed. (No up-shift)1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.CAUTION:Start work after ATF cools down.1) Turn the ignition switch to OFF.2) ...
