Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Telematics system (diagnostics) / System operation check mode / Operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Telematics» and then select «Enter».

5. On «Select Function» display, select «Active Test».

NOTE:

For detailed operation procedures, refer to “Application help”.

System operation check modeNoteGREEN LED LightingGREEN LED illuminates/flashes/goes off.GREEN LED FlashingGREEN LED OFFRED LED LightingRED LED illuminates/flashes/goes off.RED LED FlashingRED LED OFFS ...

Other materials:

Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or mor ...

Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

System operation check mode

List

Other materials: