Subaru Legacy BN/BS (2015-2019) Service Manual: Primary speed sensor

Inspection

• Check the surface of primary and secondary pulley cones for damage or wear.• Check the primary and secondary pulley for damage.• Check the bearing for seizure or wear.• Apply ...

Removal

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Remove the transmission assembly. Automatic Tran ...

Other materials:

Installation
1. Install the throttle body to the intake manifold.NOTE:Use a new gasket.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.3. Install the air intake boot. Air Intake Boot > INST ...