Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Remote transmitter program (models without "keyless access with push-button start system")

Subaru Legacy BN/BS (2015-2019) Owners Manual / Starting and operating / Remote engine start system (dealer option) / Remote transmitter program (models without "keyless access with push-button start system")

New transmitters can be programmed to the remote engine start system in the event that a transmitter is lost, stolen, damaged or additional transmitters are desired (the system will accept up to eight transmitters). New remote engine start transmitters can be programmed according to the following procedure.

  1.  Open the driver's door (the driver's door must remain opened throughout the entire process).
  2.  Depress and hold the brake pedal.
  3.  Turn the ignition switch to "ON" then "LOCK", back to "ON" then "LOCK", back to "ON" then "LOCK", then back to "ON" again and leave the ignition "ON" throughout the programming process.
  4. The system will flash the side marker lights, tail lights and parking lights and honk the horn three times, indicating that the system has entered the transmitter learn mode.
  5.  Press and release the " " button on the transmitter that you want to program.
  6.  The system will flash the side marker lights, tail lights and parking lights and honk the horn one time, indicating that the system has learned the transmitter. Upon successful programming, the remote start confirmation transmitter button will flash one time.
  7. Repeat step 5 for any additional transmitters (the system will accept up to eight transmitters).
  8. The system will exit the transmitter learn mode if the key is turned to the "LOCK" position, the door is closed or after 2 minutes.
Service mode (models without "keyless access with push-button start system")
In service mode, the remote engine start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. To engage or disengage service mode: ...

System maintenance
NOTE For models without "keyless access with push-button start system": In the event that the vehicle's battery is replaced, discharged or disconnected, it will be necessary to start the vehicle ...

Other materials:

Dtc p2123 throttle/pedal position sensor/switch "d" circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...

© 2017-2024 Copyright www.sulegacy.com