Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Impact sensor / Removal

1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.

2. Close all the doors, trunk lid and rear gate.

3. Press the UNLOCK button of the keyless transmitter or access key.

4. Disconnect the ground terminal from battery sensor. NOTE

5. Remove the impact sensor.

6. Change the setting of impact sensor using Subaru Select Monitor.

1. CHECK IMPACT SENSOR1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the windows.3. Close all the doors, trunk lid and rear gate. Leave open the front ho ...

Other materials:

Installation
1. DRIVER’S SIDE1. When replacing the actuator with a new part, apply a thin coat of grease evenly to the side face (a) of lever pin by using approx. 5 mm (0.2 in) width and approx. 0.1 g (0.004 oz) of grease squeezed out from a tube.NOTE:After installing the actuator, perform 3 — 5 times of ...

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Impact sensor

Adjustment

Other materials: