Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Selecting audible signal operation

Using an electronic chirp, the system will give you an audible signal when the doors are locked or unlocked. If desired, you can turn the audible signal off by operating the multi information display. For details, refer to "Keyless Entry System" .

Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.

Selecting hazard warning flasher operation

Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the multi information display. For details, refer to "Keyless Entry System" . The setting can also be changed by a SUBARU dealer.

Consult your SUBARU dealer for details.

Warning chimes and warning indicator

The keyless access with push-button start system is equipped with a warning chime and the access key warning indicator in order to minimize improper operations and help protect your vehicle from theft.

For details, refer to "Warning chimes and warning indicator of the keyless access with push-button start system" .

Disabling keyless access function

When the vehicle is not going to be used for a long time, or when you choose not to use the keyless access function, the keyless access function can be disabled.

WARNING If you have an implanted pacemaker or an implanted defibrillator, perform the procedure "By operating the driver's door"  to disable the keyless access function. If you perform the procedure "By operating the access key" , the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitter antenna.

NOTE

  •  The locking and unlocking function by the remote keyless entry system is not disabled.
  •  The setting can also be changed at SUBARU dealers. For more details, contact a SUBARU dealer.
  •  To start the engine while the functions are disabled, perform the procedure described in "Starting engine" .
  •  We recommend that you disable the keyless access functions under the following conditions.
  • When the vehicle is not going to be used for an extended period of time
  • When the keyless access functions are not going to be used
Door unlock selection function
The door unlock selection function makes the following operations possible.  Unlocking the driver's door without unlocking any other doors (including the rear gate) when gripping the dri ...

Disabling functions
By operating the access key If you have registered a PIN code for PIN Code Access, you can disable the keyless access function by operating the access key. For details about registering a PIN cod ...

Other materials:

Removal
1. ENGINE SIDE1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Disconnect the radiator outlet hose from thermostat cover.5. Remove the thermostat cover, and then remove ...

© 2017-2024 Copyright www.sulegacy.com