Vehicle model | CVT | MT |
Starter | Type | Reduction type |
Model | M000T38571ZC | M000T33176ZC |
Manufacturer | Mitsubishi Electric |
Voltage and output | 12 V — 1.2 kW | 12 V — 1.0 kW |
Direction of rotation | Counterclockwise (when observed from pinion) |
Number of pinion teeth | 9 | 8 |
Armature commutator runout | Standard | 0.05 mm (0.0020 in) |
Limit | 0.10 mm (0.0039 in) |
Armature depth of segment mold | Standard | 0.5 mm (0.020 in) |
Brush length | Standard | 12.3 mm (0.484 in) |
Limit | 7.0 mm (0.276 in) |
Brush spring force | Standard | 15.9 — 19.5 N (1.62 — 1.99 kgf, 3.57 — 4.38 lbf) |
Limit | 2.5 N (0.25 kgf, 0.56 lbf) |
No-load characteristics | Voltage | 11 V |
Current | 90 A or less | 95 A or less |
Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, with load response control system |
Model | A2TX3382AC |
Manufacturer | Mitsubishi Electric |
Voltage and output | 12 V — 130 A |
Polarity on ground side | Negative |
Direction of rotation | Clockwise (when observed from pulley side) |
Stator connection | 3-phase  type |
Output current | 1,500 r/min — 50 A or more 2,500 r/min — 111 A or more 5,000 r/min — 133 A or more |
Regulated voltage | 14.1 — 14.8 V [20°C (68°F)] |
Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) |
Limit | 22.1 mm (0.870 in) |
Brush length | Standard | 22.5 mm (0.886 in) |
Limit | 5.0 mm (0.197 in) |
Battery | Type and capacity | 12 V — 48 AH (55D23R) |
CCA | 356 A |
Caution