Subaru Legacy BN/BS (2015-2019) Service Manual: Specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Starting charging systems(h6do) / General description / Specification

Item			Specifications
Starter	Type		Reduction type
	Model		M000T20176ZC
	Manufacturer		Mitsubishi Electric
	Voltage and output		12 V — 1.4 kW
	Direction of rotation		Counterclockwise (when observed from pinion)
	Number of pinion teeth		9
	No-load characteristics	Voltage	11 V
	No-load characteristics	Current	90 A or less
Generator	Type		Rotating-field three-phase type, voltage regulator built-in type, with load response control system
	Model		A3TJ3492
	Manufacturer		Mitsubishi Electric
	Voltage and output		12 V — 130 A
	Polarity on ground side		Negative
	Direction of rotation		Clockwise (when observed from pulley side)
	Stator connection		3-phase type
	Output current		1,500 r/min — 55 A or more 2,500 r/min — 108 A or more 5,000 r/min — 127 A or more
	Regulated voltage		14.1 — 14.8 V [20°C (68°F)]
	Rotor slip ring outer diameter	Standard	22.7 mm (0.894 in)
	Rotor slip ring outer diameter	Limit	22.1 mm (0.870 in)
	Brush length	Standard	22.5 mm (0.886 in)
	Brush length	Limit	5.0 mm (0.197 in)
Battery	Type and capacity		12 V — 52 AH (75D23R)
Battery	CCA		490 A

Caution

• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary ...

Other materials:

Removal
1. REAR GATE PANEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the rod - power rear gate. (Model with power rear gate) Power Rear Gate Rod > REMOVAL3. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL4. Remove the garnish assembly - rear gate. Rear Gate Garnish ...