Subaru Legacy BN/BS (2015-2019) Owners Manual: Talking on the phone

Subaru Legacy BN/BS (2015-2019) Owners Manual / Audio / Hands-free phone system / Talking on the phone

The call screen opens when you perform the following operations.

When you accept a call on the incoming call screen (by selecting the key), the call screen opens.
When you are on the outgoing call screen, the screen changes to the call screen when the other party answers the call.

While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen.

When the incoming call screen is displayed and you accept the call, the screen changes to the call screen. The screen stays on the incoming call screen if you reject the call.
The and keys are disabled on the incoming call screen.

Call screen

Call (Dialpad) screen (DTMF)

No.	Function
1	Open the "Options" screen. Refer to "Phone volume settings" .
2	Mute your voice to the other party. Touch this key again to deactivate the Mute mode. This key is disabled in the private mode.
3	Change the mode to private mode. The other party's voice emits from the cell phone. Touch this key again to deactivate the private mode
4	End the call. This will return you to the phone (menu) screen when ending outgoing calls and the previous screen when ending incoming calls. This function is the same as pressing the on hook switch on the steering wheel.
5	Open the call (dialpad) screen. For details about how to use the function, refer to "By Dialpad" .
6	Switch the screen to the phone (menu) screen.
7	Allow you to make DTMF (Dual Tone Multi Frequency) calls. The numbers you enter are sent as tone signals.

NOTE

When cell phone call is changed to hands-free call, the hands-free screen is displayed and its functions can be operated on the screen.
Changing between cell phone call and hands-free call can be performed by operating the cell phone directly.
Transferring methods and operations will be different depending on the type of cell phone you have.
For the operation of the cell phone, see the manual that comes with it.
The sound quality of the voice heard from the other party's speaker may be negatively impacted.

Receiving a call

Incoming calls When a call is received, the incoming call screen is displayed with a sound. When you receive a phone call while the cell phone is connected, the screen changes to the incoming c ...

Phone settings

You can transfer the phonebook information and adjust the volume of your phone using the Bluetooth phone system. NOTE The ringer volume for outgoing and incoming calls, as well as the v ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Remove the center exhaust cover.5. Set the transmission jack under the transmission. Make sure that the support plate of transmission jack does not tou ...