Subaru Legacy BN/BS (2015-2019) Owners Manual: Temperature control

Turn the temperature control dial over a range from the blue side (cool) to red side (warm) to regulate the temperature of airflow from the air outlets.

MAX A/C mode

Perform the following operation to select the MAX A/C mode.

•  Turn the temperature control dial to the "MAX A/C" position (models with type A climate control system).
•  Press the "MAX A/C" button (models with type B climate control system).

When this mode is selected, some of the settings will be changed as follows.

Type A climate control system:

•  The air inlet selection mode will be changed to the ON position (recirculation).
•  The air conditioner will turn on.

Type B climate control system:

•  The temperature setting will be changed to the maximum cooling mode.
•  The fan speed setting will be changed to the maximum speed.
•  The airflow mode setting will be changed to the " " (ventilation) mode.
•  The air inlet selection mode will be changed to the ON position (recirculation).
• The air conditioner will turn on.

While the MAX A/C mode is selected, performing the following operation returns the system to the setting that had been selected before the MAX A/C mode is selected.

•  Turn the temperature control dial to a position other than "MAX A/C" position (models with type A climate control system).
•  Press the "MAX A/C" button again (models with type B climate control system).

"DUAL" mode (type B)

You can change the setting of the driver's side and front passenger's side temperature independently by selecting the "DUAL" mode.

You can select the "DUAL" mode by performing either of the following procedures.

•  Press the "DUAL" button
•  Turn the passenger's side temperature control dial

The "DUAL" mode can be canceled by pressing the "DUAL" button.

When the "DUAL" mode is selected: Turn the driver's side dial to set the driver's side temperature. Turn the front passenger's side dial to set the front passenger's side temperature.

When the "DUAL" mode is canceled: Set the desired temperature by turning the driver's side dial.

Fan speed control

The fan operates only when the ignition switch is in the "ON" position. Select the preferred fan speed by turning the fan speed control dial (type A), or by pressing the fan speed control buttons (type B).