- Press the talk switch on the steering
wheel.
After the voice command top screen has
been displayed, speech guidance will
commence.
NOTE
When the voice command mode is
audio mode, voice guidance for the
voice command system can be skipped
by pressing the talk switch on the
steering wheel.
- Say the command.
Example (Say "PHONE")
NOTE
- Commands related with each function
are displayed on the screen of the
each function tab. Some commonly
used commands are displayed on the
screen of the main tab. Even if any tab
is selected, all commands can be
operated.
- Saying "Help" prompts guidance to
offer examples of commands and operation
methods.
- To cancel voice recognition, select
"6", or press and hold the talk switch
on the steering wheel.
- If the system does not respond or
the confirmation screen does not disappear,
press the talk switch on the steering wheel and try again.
- The notations used in the commands
are as follows.
- < >: Numbers, titles or names to
be spoken
Voice command example: Call
name
- Press the talk switch on the steering
wheel.
- Say "Call <contacts>".
NOTE
- In the same manner as it is displayed
on the screen, "Call <contacts>",
after saying "Call a contact"
say the name of a contact. For example:
"Call a contact", "John Smith" or
"Call a contact", "Mary Davis"
- Short or abbreviated names in the
contacts list may not be recognized.
Change names in the contacts list to
full names.
- Sometimes a voice recognition result
confirmation screen will be displayed.
After confirming the result, say
"Yes" or "No".
- When the system recognizes multiple
names from the contacts list, a
name candidate list will be displayed
on the screen. If the desired name is
not displayed on the top of the screen,
say or select the number of the name
from the candidate list (number 1,
number 2, etc.) to select a name from
the candidate list.
- When a contact has multiple phone
numbers registered in the contacts list,
a candidate list will be displayed. If the
desired phone number is not displayed
on the top of the screen, say or select
the number of the desired phone
number from the candidate list (number
1, number 2, etc.) to select a phone
number from the candidate list.
Voice command example: Dial
number
- Press the talk switch on the steering
wheel.
- Say "Dial a number".
- Say "Dial <number>".
For example, if the phone number is
2345678:
Say "two three four five six seven
eight"
Do not say "twenty three forty five sixty
seven eight"
- Say"Call" or press the off hook switch
on the steering wheel.
NOTE
- When the system recognizes multiple
phone numbers, a phone number
candidate list will be displayed on the
screen. Pressing the off hook switch on
the steering wheel makes a call to the
top entry on the list. If the desired
phone number is not displayed on the
top of the screen, say the number of
the desired phone number from the
candidate list to select a phone number
from the candidate list.
- Calling to the following phone numbers
- 3 digit numbers (911, 411, 611)
- 7 digit numbers (Local phone
numbers)
- 10 digit numbers (Area code +
Local phone number)
- 11 digit phone numbers (1 + Area
code + Local phone number)
- As the system cannot recognize
additional numbers, say the complete
number without stopping.
Casual speech recognization
Due to natural language speech recognition
technology, this system enables recognition
of a command when spoken
naturally. However, the system cannot
recognize every variation of each command.
In some situations, it is possible to
omit the command for the procedure and
directly state the desired operation. Not all
voice commands are displayed in the
function menu.
NOTE
If the command cannot be recognized
completely, the command input screen
will be displayed. (Search results will
be shown based on the part of the
command that was recognized.)
Expression examples for each
function
|
Command |
Expression examples |
| "Dial <phone number>" |
Phone <phone number>. |
|
Using the voice command system
Command list