Subaru Legacy BN/BS (2015-2019) Service Manual: Water pump

Installation

1. Install a gasket to thermostat.NOTE:Use a new gasket.2. Install the thermostat and thermostat cover.NOTE:Install the parts with the jiggle pin facing the upside.Tightening torque:6.4 N·m (0. ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Assembly
1. Install each cover to the front exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb)2. Install the center exhaust pipe to front exhaust pipe.NOTE:Use a new gasket.Tightening torque:42.5 N·m (4.3 kgf-m, 31.3 ft-lb)3. Install the front oxygen (A/F) sensor and rear oxygen senso ...