Subaru Legacy BN/BS (2015-2019) Service Manual: Communication system

Installation

1. SEAT HEATER MODULE - FRONT1. Affix the seat heater module - front to the pad assembly.CAUTION:• If the cover - front cushion is removed, make sure to replace the hang wire on the cover - fron ...

General description

...

Other materials:

Installation
1. Install the purge control solenoid valve, and connect the connector and vacuum hose to the purge control solenoid valve.NOTE:Connect the vacuum hose as shown in the figure.(a)To intake manifold(b)To fuel pipe Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the air intake boot. ...