Subaru Legacy BN/BS (2015-2019) Service Manual: Continuously variable transmission(tr580)
Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580)
- Diagnostics with phenomenon inspection
- Road test inspection
- Secondary pressure (line pressure) test inspection
- Stall test inspection
- Time lag test inspection
- Transfer clutch pressure test inspection
- Air breather hose
- Automatic transmission assembly
- Awd on off switching mode
- Control valve body
- Converter case
- Cvtf
- Cvtf cooler (air cooling)
- Cvtf cooler (with warmer function)
- Cvtf cooler pipe and hose
- Cvtf filter
- Differential gear oil
- Differential side retainer oil seal
- Drive pinion shaft assembly
- Drive plate
- Extension case
- Extension case oil seal
- Forward clutch assembly
- Front differential assembly
- General description
- Inhibitor switch
- Oil pan and strainer
- Oil pump
- Oil pump chain
- Parking pawl
- Preparation for overhaul
- Primary pulley and secondary pulley
- Primary speed sensor
- Reduction drive gear
- Reduction driven gear
- Relay and fuse
- Reverse brake assembly
- Secondary pressure sensor
- Secondary speed sensor
- Torque converter assembly
- Transfer clutch
- Transfer driven gear
- Transmission case
- Transmission control device
- Transmission control module (tcm)
- Transmission harness
- Transmission mounting system
- Turbine speed sensor
- Variator chain
- X mode switch
Electrical specification
• ENGINE TYPE FBNOTE:Measure after warming up.ItemTerminal No.Measuring conditionMeasurement valueResistance between terminal and chassis groundRemarksBackup power supply34 — 10 — 13 V — ...
Diagnostics with phenomenon inspection
SymptomsFaulty partsStall speed is low after warming-up, with select lever in “D” or “R” range.Engine control systemVehicle does not move despite engine speed rising up, with s ...
Other materials:
Installation
1. Install the stop light switch onto the bracket with screws and position it with the nut.2. Adjust the stop light switch position, and then tighten the nut. Stop Light Switch > ADJUSTMENTTightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)3. Install the panel - knee guard.Tightening torque:7 N&m ...
© 2017-2024 Copyright www.sulegacy.com
