Subaru Legacy BN/BS (2015-2019) Owners Manual: Maintenance and service
Subaru Legacy BN/BS (2015-2019) Owners Manual / Maintenance and service
- Maintenance schedule
- Maintenance precautions
- Maintenance tips
- Engine hood
- Engine compartment overview
- Engine oil
- Engine oil consumption
- Checking the oil level
- Changing the oil and oil filter
- Recommended grade and viscosity
- Synthetic oil
- Cooling system
- Air cleaner element
- Spark plugs
- Drive belts
- Manual transmission oil
- Front differential gear oil (CVT models) and rear differential gear oil
- Brake fluid
- Clutch fluid (MT models)
- Brake booster
- Brake pedal
- Clutch pedal (MT models)
- Replacement of brake pad
- Tires and wheels
- Types of tires
- Tire pressure monitoring system (TPMS) (if equipped)
- Tire inspection
- Tire pressures and wear
- Wheel balance
- Wear indicators
- Tire rotation direction mark
- Tire rotation
- Tire replacement
- Wheel replacement
- Aluminum wheels
- Windshield washer fluid
- Replacement of wiper blades
- Windshield wiper blade assembly
- Windshield wiper blade rubber
- Rear window wiper blade assembly (Outback)
- Rear window wiper blade rubber (Outback)
- Battery
- Fuses
- Installation of accessories
- Replacing bulbs
- HID headlights (if equipped)
- Halogen headlights
- Front turn signal light
- Front side marker light
- Front fog light (if equipped)
- Rear combination lights
- Backup light
- License plate light
- Dome light
- Map light
- Cargo area light (Outback)
- Replacing battery
Monitor (if equipped)
To clean the audio/navigation monitor,
wipe it with a silicone cloth or with a soft
cloth. If the monitor is extremely dirty,
clean it with a soft cloth moistened with
neutral detergent then caref ...
Maintenance schedule
U.S. models
The scheduled maintenance items required
to be serviced at regular intervals
are shown in the "Warranty and Maintenance
Booklet". For details, read the
separate "Warranty and Maintena ...
Other materials:
Note
• The on-board diagnostic (OBD) system detects and indicates a fault in various inputs and outputs of the complex electronic control. Malfunction indicator light in the combination meter indicates occurrence of a fault or trouble.• Further, against any failure of sensors that would cause ...
© 2017-2026 Copyright www.sulegacy.com
