Subaru Legacy BN/BS (2015-2019) Service Manual: Mechanical(h4do)
Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do)
- Compression inspection
- Connecting rod specification
- Crankshaft specification
- Engine noise inspection
- Engine oil pressure inspection
- Engine trouble in general inspection
- Fuel pressure inspection
- Idle speed inspection
- Ignition timing inspection
- Intake and exhaust valve specification
- Intake manifold vacuum inspection
- Piston specification
- Preparation for overhaul procedure
- Cam carrier
- Cam clearance
- Cam sprocket
- Camshaft
- Chain cover
- Crank pulley
- Crank sprocket
- Cylinder block
- Cylinder head
- Engine assembly
- Engine mounting
- General description
- Rocker cover
- Timing chain assembly
- V-belt
Installation
1. CROSSMEMBER AND CUSHION RUBBER1. Install the transmission cushion rubber to the transmission, and tighten the bolt (A).2. Install the transmission cushion rubber to the center crossmember, and temp ...
Compression inspection
CAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself during measurement.NOTE:• Before checking the compression pressure, the compression condition of each cylinder ...
Other materials:
Removal
1. Raise the glass assembly - front door to the top position.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE3. Remove the trim panel - front door. Door Trim > REMOVAL4. Remove the sealing cover - front door. Front Sealing Cove ...
© 2017-2025 Copyright www.sulegacy.com
