Subaru Legacy BN/BS (2015-2019) Service Manual: Clear memory mode operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Clear memory mode operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System Check».

4. On «Select System» display, select «Transmission Control System».

5. On «Select Function» display, select «DTC».

6. On «DTC» display, select «Clear Memory».

NOTE:

For detailed operation procedures, refer to “Application help”.

Check list for interview check

Check the following items when a problem has occurred.NOTE:Use copies of this page for interviewing customers.Customer’s name Date of purchase Date of repair Transmission modelTransmissionV.I.N. ...

Diagnostic procedure for subaru select monitor communication communication for initializing impossible

DIAGNOSIS:Defective harness connectorTROUBLE SYMPTOM:Subaru Select Monitor communication failureWIRING DIAGRAM:• ENGINE TYPE FBCVT control system CVT Control System > WIRING DIAGRAM• ENGI ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B) from the air cleaner case (rear).4. Loosen the clamp (A) securing the ...