Subaru Legacy BN/BS (2015-2019) Service Manual: Data link connector note
This connector is used for Subaru Select Monitor. CAUTION: Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged. Terminal No. | Contents | Terminal No. | Contents | 1 | Blank | 9 | Blank | 2 | Blank | 10 | Blank | 3 | Blank | 11 | Blank | 4 | Ground | 12 | Blank | 5 | Ground | 13 | Blank | 6 | CAN communication (Hi) | 14 | CAN communication (Lo) | 7 | Subaru Select Monitor signal | 15 | Blank | 8 | Blank | 16 | Power supply |
|
1. SUBARU SELECT MONITOR1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, se ...
1. CONTROL MODULE(1)Engine control module (ECM)(3)Data link connector(5)Delivery (test) mode fuse(2)Fuel pump control module (ECM)(4)Malfunction indicator light • Sedan model• OUTBACK mod ...
Other materials:
Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Disconnect the connector (A) from the ma ...