Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p000d "b" camshaft position slow response bank 2

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h6do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p000d "b" camshaft position slow response bank 2

NOTE:

For the diagnostic procedure, refer to DTC P0024. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0024 "B" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 2

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to P000B. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P000B "B" CAMSHAFT POSITION SLOW RESPONSE BANK 1

Dtc p0010 "a" camshaft position actuator control circuit/open bank 1

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and ...

Dtc p000c "a" camshaft position slow response bank 2

NOTE:For the diagnostic procedure, refer to DTC P0021. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0021 "A" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 21. ...

Other materials:

Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new clevis pin.3. Connect the connector to the brake switch.4. Connect the connector to the clutch switch.5 ...