Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h4do) / Front exhaust pipe / Inspection

1. Check the connections and welded parts for exhaust leaks.

2. Make sure there are no holes or rusting.

Installation

1. Install the front exhaust pipe and center exhaust pipe as a unit to the vehicle.NOTE:Use a new gasket.2. Temporarily tighten the nuts which hold front exhaust pipe to cylinder heads.3. Install the ...

Disassembly

1. Remove the front oxygen (A/F) sensor and rear oxygen sensor from front exhaust pipe. Front Oxygen (A/F) Sensor > REMOVAL Rear Oxygen Sensor > REMOVAL2. Remove the center exhaust pipe from the fro ...

Other materials:

Installation
1. Install the regulator and motor assembly - front.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the glass assembly - front door. Front Door Glass > INSTALLATION3. Install the sealing cover - front door.4. Install the trim panel - front door. Door Trim > INSTALLATION5. Connect ...