Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Power transistor (auto a c model) / Installation

1. Install the power transistor.

2. Install the under cover assembly - passenger.

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Release the hook, and remove the under cover assembly - passenger.3. Remove the power transistor.(1) Disconnect the connector.(2) Remove ...

Rear vent door actuator

...

Other materials:

Installation
Install in the reverse order of removal while being careful of the following.1. EVAPORATION PIPE INSTALLATION1. Install the evaporation pipe to the vehicle.2. Install the evaporation pipe protector.Tightening torque:T1: 1 N·m (0.1 kgf-m, 0.7 ft-lb)T2: 7.5 N·m (0.7 kgf-m, 5.4 ft-lb)3. I ...