Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: List

Item Name

Contents

Standard

Note

Trip Count

Time stamp information, trip counter

Count

Time stamp information, original counter identification information

Time Count

Time stamp information, time counter

R Sensor Signal

Output voltage value from rear vehicle height sensor

Approx. 2.5 V

Changes according to vehicle condition.

Not displayed for models without auto headlight beam leveler system.

Actuator Signal

Power supply voltage value to headlight beam leveler actuator

Not in operation: 0%

In operation: 10 — 90% (17 seconds)

Changes according to vehicle condition.

Not displayed for models without auto headlight beam leveler system.

ECU ACC

IG voltage condition of SRF CM

8 — 16 V

Indicator Signal

Meter indicator condition

Light off: Normal

Light up: Abnormal

Blinks 3 times at 2 Hz.: When blinking 3 times at 2 Hz

Blinks 2 times at 2 Hz.: When blinking twice at 2 Hz

Check Bulb: When checking bulbs

Fixed to OFF for models without auto headlight beam leveler system.

Vehicle speed signal

Vehicle speed condition

Show vehicle speed

H/L Lo Signal

Headlight (Lo) lighting condition

OFF: when unlit

ON: when lit

Headlight High Beam Signal

Headlight (Hi) lighting condition

OFF: when unlit

ON: when lit

Fog Light SW Signal

Front fog light switch status

OFF: when switch OFF

ON: when switch ON

Steering Angle Signal

Steering angle status

Displays steering angle

Shift Position Signal

Shift lever position

Displays shift lever position

SRF Status

SRF switch status

SRF Function ON: when switch ON

SRF Function OFF: when switch OFF

Fog Light Control Status

SRF operation status

LH/RH Light off: when all unlit

LH Light on: when left fog light is lit

RH Light on: when right fog light is lit

LH/RH Light on: when all lit

Operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Subaru select monitor
...

Other materials:

Malfunction indicator light does not go off
TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.STEPCHECKYESNO1.CHECK DTC.Is DTC of engine or LAN system displayed- Read Diagnostic Trouble Code (DTC) > OPERATIONCheck the appropriate DTC ...

© 2017-2024 Copyright www.sulegacy.com