1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Headlight / Foglight» and then select «Enter». 5. On «Select Function» display, select «Data Monitor». NOTE: For detailed operation procedures, refer to “Application help”. |
Inspection
1. ARMATURE1. Check the commutator for signs of seizure or stepped wear caused by roughness of the surface. If there is light wear, use sandpaper to repair.2. Check for runout on the commutator. If excessive, replace the armature.Commutator runout:Standard0.05 mm (0.0020 in)Limit0.10 mm (0.0039 in)( ...