Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (diagnostics) / System operation check mode / Operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Air Conditioner» and select «Enter».

5. On «Select Function» display, select «Active Test».

NOTE:

For detailed operation procedures, refer to “Application help”.

List

NOTE:If not equipped (based on area or condition), some items are not displayed.System operation check mode itemDisplayUnitNoteIn-vehicle Air Temperature setting-72.47 — 193.82°C — Ambient ...

Other materials:

Installation
1. When replacing the actuator with a new part, apply a thin coat of grease evenly to the contact area (a) inside the rail of link plate by using approx. 5 mm (0.2 in) width and approx. 0.1 g (0.004 oz) of grease squeezed out from a tube. Also apply a thin coat of grease evenly to the contact areas ...