Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h6do) / General description / Preparation tool

1. SPECIAL TOOL

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
	498547000	OIL FILTER WRENCH	Used for removing and installing oil filter.
	18460AA050	CHECK BOARD	Used for inspecting the oil level switch.
	— (Newly adopted tool)	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.

2. GENERAL TOOL

TOOL NAME	REMARKS
Circuit tester	Used for measuring resistance, voltage and current.
DST-i	Used together with Subaru Select Monitor 4.

Caution

• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary ...

Component

1. OIL PAN, OIL COOLER AND ENGINE OIL FILTER(1)Oil filter(12)O-ringTightening torque: N·m (kgf-m, ft-lb)(2)Oil cooler connector(13)Stud boltT1:6.4 (0.7, 4.7)(3)Oil cooler(14)Oil pan upperT2:17 ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Remove the center exhaust cover.5. Set the transmission jack under the transmission. Make sure that the support plate of transmission jack does not tou ...