Subaru Legacy BN/BS (2015-2019) Service Manual: Transfer clutch

Installation

1. Install the O-ring to front reduction drive gear.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the ...

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the rear drive shaft. Rear Drive Shaft ...

Other materials:

Installation
1. Install the rear cushion rubber on the transmission.Tightening torque:40 N·m (4.1 kgf-m, 29.5 ft-lb)2. Install the transmission rear crossmember.Tightening torque:T1: 35 N·m (3.6 kgf-m, 25.8 ft-lb)T2: 75 N·m (7.6 kgf-m, 55.3 ft-lb)3. Remove the transmission jack.4. Install th ...